Call 08048833860 93% Response Rate

Send Email

Surface Testing Instruments

Our product range includes a wide range of bresle test kit, time 3221 surface roughness tester, time 3200 surface roughness tester, time 3110 surface roughness tester, testex tape press o film and sa 2.5 surface roughness comparator.
Bresle Test Kit
  • Bresle Test Kit
  • Bresle Test Kit

Bresle Test Kit

Product Price: Rs 29,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationBresle Test Kit for usage after Blasting
BrandHPFS
Test Time10 Sec
I Deal InNew Only
Display TypeDigital
Packaging TypeBox

The Bresle Kit – Sodium Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit – Sodium Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

The bersle Kit Comes with:

Carry Case

Digital Conductivity Meter

Bresle Patch

Distilled water

Calibration clensing solution

Syringes

Get Best QuoteRequest Callback
Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester
  • Time 3221 Surface Roughness Tester

Time 3221 Surface Roughness Tester

Product Price: Rs 1.05 Lakh / PieceGet Best Price

Product Details:
Maximum Drive Range19mm/0.748inch
PrincipleInductance type Measurement
Range400 micron
Weight (g)580
Humidity< 90% RH
Working Environment Temperature0~40 Degree C
Repeatability<6%
Radius of Skid Curvature45mm
Stylus Tip MaterialDiamond

Features:

  • Separated design, mini driver easy and convenient to use
  • Multi measurement parameters: Ra, Rp, Rv, Rt, Rz, Rq,Rsk, Rku, Rc, RPc, RSm, Rmr(c), tp, Rmr, Rpm, Rz1max,RzJIS, Rmax, Htp, Rδc, Rq, R???a, Pa, Pp, Pv, Pt,Pz, Pq, Psk, Pku, Pc, PSm, Pmr(c), Pmr, Pz1max, PzJIS,Pδc,Pq, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
  • Touch screen with TFT LCD showing all important parameters and graphs
  • High accuracy inductive pickup
  • Filtering methods of 2RC, GAUSS???Compatible with standards of ISO1997, ANSI and JIS2001
  • Connected to TIME TA230 printer to print all parameters and graphs
  • RS232 interface and USB interface meeting more needs
  • Auto switch off


Standard Delivery:

  •  Main unit 1
  •   Standard pick up 1
  •   Standard sample 1
  •   Power adapter 1
  •   Communication cable 1
  •   Protection sleeve 1
  •   Adapter 1
  •   Magnetic base 1
  •   TIME certificate 1
  •   Warranty card 1
  •   Instruction manual 1
Get Best QuoteRequest Callback
Time 3200 Surface Roughness Tester
  • Time 3200 Surface Roughness Tester
  • Time 3200 Surface Roughness Tester
  • Time 3200 Surface Roughness Tester
  • Time 3200 Surface Roughness Tester

Time 3200 Surface Roughness Tester

Product Price: Rs 98,000 / SetGet Best Price

Minimum Order Quantity: 0100 Set

Product Brochure

Product Details:
Display resolution0.001 um
Weight (g)440
Dimensions (mm)140x52x48
PowerLi-ion battery rechargeable
Repeatability<6%
Tolerance<+-10%
Max. Tracing Length17.5mm/0.71inch
Min. Tracing Length1.3mm/0.052inch
Data OutputRS232
Model NumberTIME 3200
BrandTime

Features:

  • Over dozen measurement parameters applicable for roughness test of various mechanical manufacturing processes inproduction lines, workshops and labs.
  • High accuracy inductive pickup
  • Easy operation manual and large LCD display with backlight.
  • Pickup stylus position indicator.
  • Transfer to PC via RS232 with advanced PC Software TIMESurf for more analyzing management.
  • Connected with printer to print the data and graphs on-site.
  • Storage and review function for up to 15 groups data and graphs.
  • Rk data and graphic are available.
  • Digital filter: RC, PC-RC, Gauss, D-P
  • Optional delicate accessories for more accurate results and easier operation eg. measuring platform, steel support and so on
  • Conform to ISO standard, compatible with DIN, ANSI and JIS standard.
  • Top quality Li-ion rechargeable battery.


Standard Delivery:

  • Main unit 1
  • TS100 standard pickup 1
  • Roughness test plate Ra 1
  • Charger 1
  • Protection nose 1

Optional Accessory:
  • TS110 pickup for curved surface
  • TS120 pickup for small holes
  • TS130 pickup for deep grooves
  • TS140 right-angled pickup
  • Measuring platform TA620
  • Leveling table TA630/TA631
  • Magnetic stand
  • Steel adapter (Φ8)
  • Steel adapter (L-attachment)
  • Printer TA230
  • Steel support 1
  • Dataview 1
  • Communication cable 1
  • TIME certificate 1
  • Warranty card 1
  • Instruction manual 1
Get Best QuoteRequest Callback
Time 3110 Surface Roughness Tester
  • Time 3110 Surface Roughness Tester
  • Time 3110 Surface Roughness Tester

Time 3110 Surface Roughness Tester

Product Price: Rs 48,000 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Product Details:
BrandTime
Model NumberTime 3110
Tracing Length6 mm
Tracing Speed1.0 mm/sec
Tolerance+-15%
Repeatability<12%
Operating Temperature0~40 Degree C
Humidity<80%
Storing Temperature-25 Degree C ~ 60 Degree C
Power3.6V Li-ion battery
ChargerDC6V, 3 hours (charging time)
Dimension (mm)110x70x24
Weight (g)160
Features:
  • Pocket-size unit with economical price, widely used in production lines, workshops and labs.
  • Wide measuring range suitable for most materials, and applicable for flat, outer cylinder andsloping surface
  • Ragged design device with a long lifetime, while keeping the accurate and reliable data results
  • Both Ra and Rz measurement range
  • All calculated measurement results shown on its LCD back-lit display hardly after tested
  • Indicator and alarm for low battery, out-of-limit values and dysfunction
  • Chargeable Li battery and improvement of the circuits function.
  • Improvement and Protection for sensor to secure the high accuracy and good stability.
  • Conforms to ISO and DIN

Standard Delivery:
  • Main unit 1
  • Specimen Ra 1
  • Charger 1
  • TIME certificate 1
  • Warranty card 1
  • Instruction manual 1


Optional Accessory:

  • Various Ra specimen with Ra values: 0.1μm, 0.2μm, 0.4μm, 0.8μm, 3.2μm


Additional Information:

  • Item Code: Specification
  • Production Capacity: As per requirement
  • Delivery Time: Ready stock or within 2 weeks time
  • Packaging Details: Main unit Specimen Ra Charger TIME certificate Warranty card Instruction manual
Get Best QuoteRequest Callback
Testex Tape Press O Film
  • Testex Tape Press O Film
  • Testex Tape Press O Film
  • Testex Tape Press O Film
  • Testex Tape Press O Film
  • Testex Tape Press O Film

Testex Tape Press O Film

Product Price: Rs 2,600 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Product Details:
Backing MaterialPlastic
Tape Length>50 m
ColorWhite
BrandTestex
Usage/FeatureIndustrial Purpose
Tape TypeAdhesive
Total ThicknessUpto 115 microns
Surface profile gauge or testex tapes can test surface roughness. Most commonly used testex tapes/ press o films are popular as it can give permanent record of the surfaces as a proof of test. blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the snap gauge. Testing & Inspection can be done in three easy steps. Detailed procedure is furnished with testex kit or tapes. Testex Tape is supplied in a roll containing 50 tests and is available in four different grades to cater for different applications. The snap gauge is supplied in a carrying case with a burnishing tool. Paint applicators, inspectors and researchers for its simple operations and results prefers to use Testex tapes (Press-O-Film) Testex Tape (Press-o-film) complies with ASTM, NACE and SSPC methods measurement. ASTM- Reproducibility is given in ASTM Standard 4417-93 for both X-coarse and coarse grade replica tape. NACE- Standard RP0287-95 addresses the issue of accuracy of measurement, test results. SSPC- The Society for Protective Coatings, recommends a minimum of three measurements of profile per 100 square feet (10 square meters).

Standard ISO8503-5 describes preparation of steel:

Coarse 0.8 to 2.5 mils/20 to 64 microns
X-Coarse 1.5 to 4.5 mils/40 to 115 microns
Get Best QuoteRequest Callback
SA 2.5 Surface Roughness Comparator
  • SA 2.5 Surface Roughness Comparator
  • SA 2.5 Surface Roughness Comparator

SA 2.5 Surface Roughness Comparator

Product Price: Rs 5,800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandRubert
Model Name/NumberSA 2.5
Country of OriginMade in India
ShapeSquare
Packaging TypeBox

A precision Nickel comparator plate which conforms to International Standard ISO 8503 for grit and shotblast surface roughness comparison measurement. Popular comparators for grit blasting comparison or shot blasting comparison When steel has been blast cleaned, the surface consists of random irregularities with peaks and valleys that are not easily characterized. Experts have recommended that the profile should be identified as dimpled (shot blast) or angular (grit blast) and that they should be graded as Fine, Medium or Coarse with each grade being defined by limits specified in ISO 8503, these characteristics are considered to give sufficient distinguishing features for most painting requirements. Easy to use, place the surface roughness comparator against an area of the test surface, compare in turn the four sectors of the four sectors of the comparator against the test surface using the X7 magnifier, placed so that the test surface is viewed. There are two comparators shot blasting ,This is specially designed to check the roughness of steel surfaces which have been blast cleaned to cleanliness grades SA 2.5 comparators conform to ISO 8503



Additional Information:

  • Production Capacity: as per your requirement
  • Delivery Time: within 2 weeks time
  • Packaging Details: Contact HPFS
Get Best QuoteRequest Callback
Accu Dyne Test USA Dyne Test Pens Blue Colour Toxic

Accu Dyne Test USA Dyne Test Pens Blue Colour Toxic

Product Price: Rs 2,200 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
ColorBlue
MaterialPlastic
FeaturesSpill proof Design avoiding wastage and possibility of air contamination
Usage/ApplicationTo Measure Surface Dyne Level
Standards levels of Dynes available(XX)Standard Dyne Levels: 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66
SurfaceUSD
Peripheral Shrinkage4 Sec
Length2 Inch
Packaging TypeBox
USA Make “ACCU DYNE TEST” Marker Pen for wet ability measurement / surface cleanliness measurement / surface energy level measurement. Standards levels of Dynes available. (XX)Standard Dyne Levels: 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58 & 60 Dynes/ Cm. (NN)Non Standard Dyne Levels: 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70 Dynes/ Cm. (MOQ : 2 nos per dyne & total of 6 nos. of non standard dyne pens)
  • Each Pen Has Shelf Life of 5 – 6 mths.
  • Each pen has 30 ml approx fluid

The set is supplied with handling & disposal guide, MSDN Certificate, report for using the marker pens & its compatibility with standards like ASTMD 2578 etc.

Standard Dyne Test Marker Pen:
  • ACCU 101XX Individual pens (XX refer to standard dyne level required)
  • Dyne Level:(select from above list)
  • ACCU 601 (Set of 06 Dyne Pens)
  • Dyne Level: 30, 32, 34, 36, 38, 40
  • ACCU 602 Suitable for water / solvent printing over PE, PP etc. (Set of 06 Dyne Pens)
  • Dyne Level: 36, 38, 40, 42, 44, 46
  • ACCU 603 Suitable for adhesives and coating (Set of 06 Dyne Pens)
  • Dyne Level: 46, 48, 50, 52, 54, 56
  • ACCU 604 Self Select customized Pack (Set of 06 Dyne Pens)
  • Dyne Level: any six standard pen
  • ACCU 605 Self select customized Pack (Set of 06 Dyne Pens)
  • Dyne Level: any six standard pens
  • ACCU 1201 Self Select Customized bulk pack (Set of 12 Dyne Pens)
  • Dyne Level: any Twelve standard pens
  • ACCU 1601 Complete Quality check set (Set of 16 Dyne Pens)
  • Dyne Level: 30 to 60 in increment of 2 dyne

Non Standard Dyne Test Marker Pen :
  • Non Standard Dyne Levels: 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70 Dynes/ Cm. (MOQ : 2 nos per dyne & total of 6 nos. of non standard dyne pens)
  • ACCU N601 (Set of 06 Dyne Pens)
  • ACCU N1201 (Set of 12 Dyne Pens)

(Note: On an average each pen is suitable for approx 500 test of 2” length - never actually tested)

Additional Information:

  • Production Capacity: Depends on your requirement
  • Delivery Time: Ready stock or within 3 to 6 weeks time
  • Packaging Details: Dyne pens
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Surface Testing Instruments"?
Thank youYour Enquiry has been sent successfully.
© HPFS Instruments India LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.