Call 08048833860 92% Response Rate

Send Email

Coating Thickness Gauge - DFT Meter

A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost. Dry film thickness measurements can be used to evaluate a coating’s expected life, the product’s appearance and performance, and ensure compliance with a host of International Standards.
Coating Thickness Gauge Byko-Test Fe/Nfe

Coating Thickness Gauge Byko-Test Fe/Nfe

Product Price: Rs 95,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Model Name/Numberbyko-test Fe/NFe : Code 3790
Measuring Range0 to2000 microns
DisplayColour Display
Display TypeDIGITAL
AccuracyRefer technical details
WeightRefer Technical details
byko-test Fe/NFe : Code 37904 measurements in one instrument: Film thickness Fe/NFe, Air temperature, Relative humidity, Dew pointSSPC specific mode for standardized  measurement protocols and calibration routines
  • Compact design for one hand operation
  • Color display with 90° and 180° flip screen
  • Automatic substrate recognition
  • Strong wear resistant ruby probe tip
  • Zero, single and two point calibrations
  • Key lock for only taking readings
  • Hi/Low tolerance settings for pass/fail warning
  • Statistics mode with 1000 measurement memory
  • Continous measurement mode
  • Stability mode warns user when instrument is tilted preventing wrong readings

Technical Attributes
Substrate Fe : Steel or IronSubstrate NFe : Non-magnetic metals: aluminum, copper, brass, zinc, stainless steelMeasuring Range : 0 - 2000 µmMeasuring Range : 0 - 79 milAccuracy : ±2 µm + 3% des Messwertes ±0,08 mil + 3% des Messwertes
Temperature Measuring Range : 0 - 50 °CTemperature Measuring Range : 32 - 122 °FTemperature Accuracy : ±1.5 °C; ±2.7 °FHumidity Measuring Range : 0 - 100 % RHHumidity Accuracy : 20 - 70 %RH: ±4% 0-19 & 71-100 %RH: ±6%
Minimum substrate thickness : Fe: 0,2 mm; NFe: 0,05 mmMinimum substrate thickness : Fe: 0,008 in; NFe: 0,002 inMinimum Curvature : Convex 5 mm; Concave 30 mmMinimum Curvature : Convex 0.20 in; Concave 1.2 inMemory : 1000 readingsWeight : 0.16 kgWeight : 0.35 lbDimensions: L x W x H : 11.5 x 6.7 x 4.4 cmDimensions: L x W x H : 4.53 x 2.65 x 1.75 in
Get Best Quote Request Callback
Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M
  • Coating Thickness Gauge Novotest Tp-1 M

Coating Thickness Gauge Novotest Tp-1 M

Product Price: Rs 44,650 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Model Name/NumberNOVOTEST TP-1M
Measuring Range0 micron to 60 mm
DisplayGraphical display with backlight
TypeGraphical display
Display TypeLCD

Coating Thickness Gauge NOVOTEST TP-1M is a thickness gauge for measuring the thickness of various coatings on metals, and with connected specialized probes to the device, user can measure the temperature and humidity of air, surface temperature, calculate the dew point, and also measure the depth of grooves or surface roughness. The device is very easy to use, ready to use right out of the box, and does not require special user skills. The minimum number of buttons and an intuitive menu makes it an ideal device of operational non-destructive measurement of the thickness of almost any coating with high accuracy.

The main advantages and tasks that can be solved with Coating Thickness Gauge NOVOTEST TP-1M:



The most common task that is successfully solved by the device. Typically, coating measurements in the range of 0 to 500 μm require high accuracy; for these purposes, a coating thickness gauge complete with an F-0.5 probe is ideal. Also, for measuring the thickness of coatings on small, radius products, or in grooves, it is possible to use a specialized probe F-0.3.


To measure the thickness of coatings on non-ferrous metals, the NF-2 probe is used, which allows user to measure coatings in the range from 0 to 2 mm. By default, the NF-2 probe calibration is performed for aluminum, if the task is to measure the coating on materials significantly different in properties from aluminum, the probe can be calibrated by user itself.



For measuring paintwork coatings, polymers and other dielectric coatings in the range up to 5 mm, probes F-2 and F-5 are suitable, which will provide a testing range of up to 2 or 5 mm, accordingly. As with any measuring instrument: the wider the range, the higher the error, so the user, when choosing a probe, should be guided by this principle to select the best option.



To measure very thick coatings on any metals (steel or non-ferrous metals) – probes M-12, M-30 and M-60 are used, which provide measuring ranges up to 12, 30 and 60 mm, accordingly. This can be bitumen insulation, a coating of polymer tapes, or some specific task of measuring the main thickness of the material, where ultrasonic waves can’t be used due to large attenuation in the material, inhomogeneity or multilayer material.


Measurement of groove depth and roughness. The DSH probe allows user to evaluate roughness, measure the depth of corrosion, surface defects and grooves. To determine the roughness, it is necessary to perform a series of measurements on the surface of a small area, and then using the formula to calculate the desired value.

Measurement of temperature, humidity and dew point. Using the DTVR probe, it is possible to measure humidity and air temperature, on the basis of which the device calculates the dew point, which is very important to know before applying the paint to the base.

Surface temperature measurement. Using the DT probe, the surface temperature is measured by the contact method.



The device is made in an ergonomic enclosure, which is equipped with a silicone cover, which makes the electronic unit of the device shockproof. Also, the device is resistant to extreme temperatures, and can be used at temperatures from -20 to +40 ° C.

Additional Information:

  • Item Code: 9027
  • Delivery Time: 2 to 3 weeks
  • Packaging Details: Standard Package: Thickness gauge electronic unit TP-1M Probe(s) Set of reference thickness samples Batteries (AA) ¿¿¿ 2 pcs Charger Operating manual Case
Get Best Quote Request Callback


Product Price: Rs 13,500 / UnitGet Best Price

Product Brochure

Product Details:
Model Name/NumberELECOAT M
Measuring Range0 to 1500 micron
Display TypeLCD
Accuracy0.1<20 Microns, 1>20 Microns
Weight400 grams
Country of OriginMade in India

Ferritic Digital Coating Thickness GaugeStandard Features
Technology: Latest technology with use of smart micro-controller. Direct Measurement - No Calibration Required for Most of Surfaces. Highest Accuracy and Resolution."Zero" and "SET" functions along with Foils and Zero-base simplicities Calibration. Calibration Retaining System.
Probe Design: Fully Metallic / High Quality Plastic Probe for High Service Life. Well Balanced and Spring-Loaded Probe for Accurate measurements. Ideal Probe design to take reading in complex Field Areas.??? Strong Wear-Resistant Tip for Extra Service Life. Highly flexible Probe cable with Strain relief.
Ergonomics: Compact and Light Weight Instrument. Full ABS high impact resistant body. Attractive Instrument display and visuals. External battery Compartment.
Energy Efficient: Auto-Off Function. Sun Readable and Energy Saving Display.

Get Best Quote Request Callback


Looking For "Coating Thickness Gauge - DFT Meter"?
Thank youYour Enquiry has been sent successfully.
© HPFS Instruments India LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.